Booster cable, save your car in emergency

When was the last time your vehicle didn´t start? If so, then you know it can feel downright terrifying and out of control. If your mobility is significantly affected, this can make you feel quite helpless especially if there are places to go or things to do. They are useful for connecting your car battery to another vehicle's, and getting that sudden boost of energy you need. That’s right, We will guide you through using booster cables in this step by step process to ensure your car starts whenever you need it. 

What Are Booster Cables? 

How booster cables by XLL work booster jump leads 300×200 warm up talk on whats booster cables long wires with clamps on two ends are called Booster Cable. The clamps from your car are used to connect the dead battery in your car with a working batter usually found underneath the hood of another vehicle. With that set up, the good battery can release power and allow your car to try and start all over again. This is called "Jump-starting" a car. 

They can save your life, because if you find yourself on the side of a road without them. Carry booster cables in your vehicle -those jumper cables you keep on forgetting to throw back into the trunk from underneath your jacket, can save time and inhaling of those horrible fumes if whatever reason causes a car not starting when another driver is within earshot. They are those that can get you out of a hole and back in your way while waiting for help. 

How to Use Jumper Cables for A Quick Boost

That was a waste of time now let us learn how to use booster cables in an event. Now let us breakdown a step by step simple guide for you all;

Step 1: locate a running car with a good battery. Step #2 the car that cannot start is parked close by pic 2 so the heavy duty booster cables can reach both batteries easily 

Step 2: then turn both cars off and leave them in park. It will be essential to engage the parking brakes of both cars, in order to prevent them from moving. 

Step 3: now, pop the hoods of both cars. Look for the batteries. More often than not, these are square metal boxes with the wires hanging off of them. 

Step 4: the positive and negative terminals you should be able to find them on both batteries. The positive terminal is generally a red color and will have the plus sign +, while the negative one has black -, or minus. It is vital for safety to know the difference between these terminals. 

Step 5: connect the booster cables to your battery. Step 2 - connect the positive clamp first to the dead battery's positive terminal after that go ahead and attach the other end of positive clamp to the positive terminal on working battery. Then take the negative clamp and connect it to the working battery's negative terminal. Lastly, connect the other end of the negative clamp to a metallic surface on your dead battery car. You can use this metal surface to paint. This makes the things in common good and an initial bond

Step 6: once you have connected the cables properly, start the working car and let it run for a couple of minutes. This will work to charge the non-working battery and provide it enough energy for cranking. 

Step 7 - attempt to restart the dead battery car if it fails to boot up immediately, fear not. Let the working car run for a few more minutes and then try again. 

Step 8: remove the booster cables after the dead car starts. Reverse of the way you connected them first, remove the negative clamp from dead battery next tackle off the positive clamps on working one and then take it off in order. This will also make sure that nothing is still live. 

Tips to keep your car running

Now that we have taught you how to jump start a car using battery copper booster cables, read on for 33 tips which will keep your car starting every time it needs to. 

Tip 1: on the battery terminals, dirt and grime can accumulate, Thereby preventing it from working. 

Tip 2: drive your car frequently the battery will drain if you leave it standing still for too long. Driving your car for a little while will help recharge the battery. 

Tip 3: turn electrics off when turning the engine off make sure to ensure all electric items are turned such a lights, radio etc. This helps to save battery. 

Tip 4: regularly check your battery in fact, more often than not auto repair shops will provide a complimentary battery check and give you recommendations. You should be doing it annually. 

Booster Cable Safety Tips

Its also very important to utilize booster cables safely. Following are a few tips so that you do not get caught: 

Here are some tips:  

Tip 1: always check to be absolutely certain the booster cables you have at hand are suitable. The cords are worn or damaged in any way same situation then do not use them. It’s better to be safe. 

Tip 2: ensure the clamps are clean and free from rust or corrosion. It is to assist in a good electrical contact between the clamps and the battery terminals. 

Tip 3: remember to not allow the clamps touch each other as they are connected into the batteries. This just might cause a short, causing sparks and this could be potentially dangerous. 

Tip 4: also, it very well maybe harmful to smoke or use any open flames near the batteries. Gas in rare instances, batteries will emit very gas hazardous and potentially explosive.